Contacter l'auteur de ce blog
OBDII.NET Blog a shared car diagnostic tool
<< Octobre >>
Ajouter obdiinet à vos favoris
Iscancar VAG MM-007
English/Chinese version is in stock now.And MM-007
can support controller diagnostic, such as basic setting, channel adaption, read DTC, clear DTC, system login .etc
1.Firstly,it will request PIN and CS information to input into new instrument, you can get it via Iscancar VAG MM-007
to read by OBD from the engine or IMMO system to read.
2.Enter the new PIN, CS1 (6 bytes CS in the engine), CS2 (another 6 bytes CS), in general,the IMMO system will display all the data, power level (the value in IMMO and the engine system needs to the same).
3.Enter new VIN and IMMO code.
4.Confirm the data is right or not.
5.If all the data is right,the dashboard will display new information for PIN,CS,VIN.etc.
6. Instrument matching is completed, the dashboard will display 0-0, then need to learn the key and synchronous engine, you can complete it with VAG MM-007 too.
Support controller diagnostic, such as basic setting, channel adaption, read DTC, clear DTC, system login etc.
There are many commonly used functions. We have simplified the process so you can follow more easily.
OBD read PINs, adaption after replacing controller, gateway register etc.
Write data record:
When replacing new controller, you must write data record online or the controller will not work correctly. Now you can use this diagnostic tool to write data record offline. And you can active some functions like MKE etc.
Example for write data record:
- PQ35 gateway 7N0907530AN: active MKE. after writing data record, you can set MKE on dashboard.
- MQB gateway 5Q0907530AJ: active MKE. after writing data record, you can set MKE on dashboard.
- PQ35 replace kessy 5K0959434B: before writing data, there’s a DTC “no basic setting”, the car can’t find keys. After writing data the DTC disappear, the car can find keys.
- MQB replace kessy 5Q0959435A: before writing data, there’s a DTC 10478040(invalid data record), the car can’t find keys. After writing data the DTC disappear, the car can find keys.
- MQB front camera 5Q0980653G: before writing data, there’s a DTC 0649 (invalid data record), after writing data the DTC disappear.
- MQB new ACC 5Q0907561A: before writing data, there’s a DTC” invalid data record”, after writing data the DTC disappear.
- PQ Xenon 5M0907273F: before writing data, there’s a DTC 10478040 (invalid data record), after writing data the DTC disappear.
- PQ tire pressure monitor 3AA907273D: before writing data, there’s a DTC 12652550 (invalid data record), the controller don’t work, after writing data the DTC disappear, you can set tire pressure on the dashboard.
- MQB new DCC 5Q0907376: before writing date, there’s a DTC 813056 (invalid data record), after writing data the DTC disappear.
- MQB parking assistance 5Q0919298K: before writing data, there’s a DTC 10478040 (invalid data record), after writing data the DTC disappear.
Essential Function of Refitment and Maintenance:
Many functions are very useful for refitment and maintenance, such as controller replacement, throttle adaptation and EPB replace brake pads. In addition, further functions will be added continuously.
There’s a built-in database in the diagnostic tool. Users can write data record without online account. It has already supported many controllers, and more data will be continuously added.
technical support team is professional and efficient, online technical support for free.
Provide lifelong after-sale perfect service guarantee customer trouble free operation of machine.
Consider about customer feedback suggestion and requirement carefully.
The VAG MM-007
can be upgraded through the internet.
Voltage: 5V USB / 12V OBD
LCD resolution: 320×240
USB standard: USB2.0
Working temperature: 0-60°C
OBD line length: 1.5meters
Power consumption: 80mA/12V
XTOOL EZ400 PRO is different from Xtool EZ400 in the VCI box, XTOOL EZ400/EZ400 Pro is different from Xtool PS90/PS80 in the special functions.
XTOOL EZ400 PRO is all-in-one machine, no need any more VCI box, so it is 2.64LB lighter than Xtool EZ400, lighter package means less shipping cost and easier to use.
Attach Xtool EZ400 VCI box
Attach XTOOL EZ400 PRO full package (without the above Xtool VCI box)
2). XTOOL EZ400 PRO / XTOOL EZ400 functions < Xtool PS90
Xtool PS90 (10inch tablet with wifi and all function):
Full system diagnosis on all makes……confirmed
Odometer Adjustment ……confirmed
Special functions (Oil Reset/Engine Oil Light Reset, EPB Electrical Parking Brake Adaptation, TPS Throttle Body Adaptation, EPS Electric Power Steering Calibration, Gear Learning, ABS Bleeding , ECU Reset, Tire Pressure Warning Light Reset and Battery Reset.) ……confirmed
Full system diagnosis on all makes……confirmed
Special functions works: Oil Reset/Engine Oil Light Reset, EPB Electrical Parking Brake Adaptation, TPS Throttle Body Adaptation …confirmed
3). XTOOL EZ400 PRO / XTOOL EZ400 is much cheaper than Xtool PS90
- Original Xtool products and update on Xtool official site xtooltech.com.
- Full system diagnosis…… confirmed
- Both can perform these special functions: Oil Reset/Engine Oil Light Reset, EPB Electrical Parking Brake Adaptation
- One-year free update, one-click software update via WIFI
- After-sales technicalsupport (Remote access).
|The following models are supported:|
Beside DAF truck, MULTI-DIAG TRUCKS also support diagnosing more than 60 brand trucks like MERCEDES BENZ, MAN and SCANIA, including 1000 electronic control systems. MULTI-DIAG TRUCKS is the most powerful diagnostic tool for heavy duty and bus; it covers all European trucks, buses and light vehicles. Multi-Diag truck is developed in Europe, the data is absolute accurate
- What electronic control systems of DAF trucks WAS MULTI-DIAG TRUCKS support diagnosing?
The following systems are supported:
|ABS C, Anti lock braking system|
|ABS D, Anti lock braking system|
|ABS E, Anti lock braking system|
|ABS/ASR D, Anti lock braking System|
|ACH-EA, Auxiliary Heater|
|As Tronic, Gearbox with electronic control|
|DIP-4, DAF Instrument Panel|
|DMCI, Multi-Controller Injection|
|DTCD, Digital Tachograph|
|EAS2, Exhaust gases treatment|
|EBS 2, Electronic Braking System|
|EBS. Electronic Braking System|
|ECAS 2 4X2, Electronically Controlled Air suspension|
|ECAS 4, Electronically Controlled Air Suspension|
|ECAS-1, Electronically Controlled Air Suspension|
|ECAS-2 6×2,Electronically Controlled Air Suspension|
|ECAS-3,Electronically Controlled Air Suspension|
|ECS-DC3, Engine Control System – DAF Cummins|
|ECS-DC4, Engine Control S]/Stem – DAF Cummins|
|UPEC, Unit Pump Electronically Controlled|
|Vic, Vehicle central computer|
|vic-2, Vehicle central computer|
|VIC-3, Vehicle central computer|
- What function MULTI-DIAG TRUCKS support for DAF trucks?
MULTI-DIAG TRUCKS supported function for DAF trucks: Dignose, Messwearte, Ecu Date, Stellglieder, Steuergerate-Daten, Parameter, Kalibrieren, Rucksetzen, Manueller Prozess
For more details about MULTI-DIAG TRUCKS function list, please check the column “technical support” or the “Related Download Files”.
Note: Because the truck electronic system updating cycle is a little long, usually it will spend 3 -5 years until the new function is released, therefore, even in 2015 but your truck was manufactured in 2012, our MULTI-DIAG TRUCKS will still work with your car. However, we will keep developing for our users the newer and reliable software with new function.
- Does MULTI-DIAG TRUCKS Diagnostic tool only diagnose trucks?
No, not only trucks, except trucks, MULTI-DIAG TRUCKS also support light commercial vehicles, special vehicles, tractor, agricultural vehicles, trailer and bus. For more specific supported models, please download from our column “Technical support/service” or under “Related Download Files”.
- What language WAS MULTI-DIAG TRUCKS is available with?
MULTI-DIAG TRUCKS is available with 17 common languages from more than 180 countries.
- Is MULTI-DIAG TRUCKS only a multi-functional diagnostic tool for truck, bus and engineering vehicles?
No, MULTI-DIAG TRUCKS is not only an original diagnostic tool whose DTCs and data stream is absolute accurate, it is even more like a heavy duty encyclopedia, as Michelle and Alldata, Multi-Diag trucks also contains maintenance information, manual, circuit diagram and device parameters.
7. Can MULTI-DIAG TRUCKS replace NEXIQ USB-LINK In the function?
No, NEXIQ USB-LINK, DGTECH DPA5 and CAT CA2 are all RP1210A/B compatible devices; they are American standard and mainly work with American vehicles. MULTI-DIAG TRUCKS mainly work with the famous European and Russian vehicles, MULTI-DIAG TRUCKS also work with a part of American vehicles.
8, Compared with the other tuck diagnostic tools, what advantages MULTI-DIAG TRUCKS owns?
- Compared with the American OTC Genisys EVO®, which is more powerful in working with American vehicles and OBD protocol vehicles. MULTI-DIAG TRUCKS is more powerful in diagnosing European heavy duty, such as: Germany Mercedes Benz, MAN, DEUTZ, Sweden Volvo, Scania, French Renault and more models.
- WAS MULTI-DIAG TRUCKS is developed by the cooperation of Actia and JALTEST, and MULTI-DIAG TRUCKS hardware is also designed by the same master who also designs JALTEST LINK hardware, but Spanish JALTEST LINK is more attentive to hardware. Besides with best hardware, Actia MULTI-DIAG TRUCKS software is also the best in the world, therefore, it will be amazing to troubleshoot truck trouble with MULTI-DIAG TRUCKS.
Open Actia Multi-Diag 2016 software “I 2016_36.05 (E:) “.
Copy SN 033918.txt to desktop and open Actia Multi-Diag 2016 setup.exe.
You will see Multi-Diag Office InstallShield Wizard.
Click “Next”, “I accept…” then “Next”.
Copy the SN “033918” from txt file and click “Next”.
Select the setup type: USA.
Then choose “Profile ACTIA (Standard)” option.
Wait it complete and you will see the Multi-Diag shortcut on desktop.
Choose the “restart computer” option and click “Finish”.
After that it will automatically pop up a Found New Hardware Wizard for Pass-Thru XS USB Driver.
Choose “Install the software automatically (Recommended)” option and click “Next” then “Finish”.
Now you can find the Pass-Thru XS USB Driver already exist.
Then you can see a Found New Hardware Wizard for USB Pass-Thru Driver (Multi-instance).
Choose “Install from a list of specific location” option and click “Next”.
Check the box “Include this location in the search” then choose C: disk→ ACTIA→ Drivers VCI→ PT1G.
Click “Next” then “Finish”.